Must-Have QC Tools
Basic tools of measuring are neither reliable nor accurate. Measuring thickness of composite parts or wet films becomes precise with our range of gauges.
Wet Film Thickness Gauge (Multiuse)
Product Name
Code
Measures wet coatings that are sprayed, dipped, or brushed on a smooth surface – paints, lacquers, adhesive, or gel coats. Made of aluminum, it is a dual scale gauge. Measures up to 80 mils on side #1 and from 25 to 2032 microns on side #2. Pocket-sized at 2¼” – 3¼”.
Instructions For Use
- Place gauge on wet film at 90° angle
- Press into film
- Withdraw and note deepest tooth having paint on it and next higher tooth that is not coated
- The wet film thickness lies between these two readings
- Clean gauge in any suitable solvent immediately after use
The drawing indicates that tooth marked 3 mils is covered with the wet paint and tooth marked 4 mils is not covered. This indicates that the true wet film thickness of the material is between 3 and 4 mils thick.
Wet Laminate Gauge
Product Name
Code
- Measures upto 1″ of wet laminate
- Made of anodized aluminum
- Steel lock for repeated usage
Humidity Meter
Product Name
Code
Humidity Meter senses, measures and reports both moisture air & air temperature. The ratio of moisture in the air to the highest amount of moisture at a particular air temperature is called relative humidity.
Relative humidity becomes an important factor during FRP production.
Our Humidity Meter is small in size, light in weight and easy to carry. Although complex and advanced, it is convenient to use and operate. Its ruggedness will allow many years of use if proper operating techniques are followed.
Digital Calipers
Product Name
Code
• Inch/Metric/Fraction conversion
• Resolution: 0.001″ / 0.1 mm / 1/64″
• Alloy jaws with chrome finish
• Battery: 3V CR2032 included
• Spring load movement for fast and easy measurement